YDbDr to xvYCC Converter - Color Space Converter

Also known as the YDbDr color space.There are 3 channels in total, Y,range from 0 to 1.Db,range from -1.333 to 1.333.Dr,range from -1.333 to 1.333.

Origin: The YDbDr color space was designed for the European SECAM color television system for color encoding in analog television broadcasting.

Primary Names: YDbDr color space, where 'Y' represents the luminance component, 'Db' and 'Dr' respectively represent the blue and red difference components.

Typically expressed as a triplet, for example: YDbDr(0.5, -0.1, 0.9) represents a color with specific luminance and chromaticity differences.

Usage Scope: Primarily used in SECAM standard color television broadcasting, which is a color video standard specific to certain countries and regions.

Additionally, compared to PAL and NTSC, SECAM uses frequency division multiplexing to separate the chrominance components, reducing cross-color interference during color image transmission.

Also known as the xvYCC color space.There are 3 channels in total,Y,range from 0 to 255.Cb,range from 0 to 255.Cr,range from 0 to 255.

xvYCC was developed by Sony and standardized by the International Electrotechnical Commission (IEC) in 2005. It is an expansion over the standard YCbCr color space, designed to support a wider range of colors for high-definition video.

The main name is xvYCC, also known as IEC 61966-2-4 or extended-gamut YCC.

Similar to YCbCr, xvYCC is typically expressed as three component values (Y, Cb, Cr). However, xvYCC uses a signaling method that enables it to represent a broader range of colors. This includes values for Cb and Cr that, unlike YCbCr, can exceed the nominal range of video levels, going below 16 or above 235 in 8-bit terms.

xvYCC is used primarily in high-definition video formats and devices such as Blu-ray players, digital cameras, and HDTVs that support HDMI 1.3 or higher. It allows for more vivid and accurate color representation on capable devices.

xvYCC can display a wider range of color values than sRGB by allowing values that fall outside the typical RGB gamut. It achieves this by using the same color encoding method as YCbCr but permits values in the signaling that exceed the range of the BT.601 or BT.709 color spaces.